Reclaim/Media Recovery Systems

Full mechanical reclaim system with various configurations. Single screw, H, U, and full floor. Systems include bucket elevator, abrasive classifier, and hopper. Dust collector and floor configurations are to customer's specifications. Below is an example of a system with a single cross s...

An abrasive blast facility reduces blasting costs and environmental contamination by bringing blasting indoors, making possible the use of recyclable abrasives. To make the most of recyclable abrasive, an efficient abrasive recovery system automates the media recovery and cleaning processes. ...

The revolutionary Flat-Trak® Recovery Floor is a quite, low profile, full-area recovery system. Simplicity in design and operation Rugged steel vanes, suspended within a pneumatically powered frame, push the media forward. The pneumatic drive cylinder delivers up to 440 pounds of forc...

The hopper and bucket elevator recovery systems process up to 180 cubic feet per hour of dense and coarse media, such as steel grit and shot.  With the 3 ft. x 3 ft. hopper system, flush mounting requires a pit just 4 1/2 feet deep.  Where a high water table prevents excavation, the sma...

Our standard sweep-in M-Section® pneumatic recovery systems efficiently recover and recycle most medium and low-density (less than 100 lbs per cu. ft.) blast media, such as glass bead, plastic, and aluminum oxide.  The recovery section can be placed in a shallow channel, just 10 inches d...

Designed primarily for use with steel grit and shot, our screw conveyor recovery module with bucket elevator can continuously reclaim up to 180 cubic feet of media per hour.  Available in standard lengths of 8, 12, 20 ft., and up to 50 feet by special order,  screw systems feature r...