Products » Coating/Painting Equipment » Spray Gun Extensions » Binks Conventional Style HC
Binks Conventional Style HC
Manufacturer: Binks
- Used to coat the inside diameter of 2" to 24" pipe.
- Needs to be pressure fed from a pressure tank, pump or pressure cup.
- 360 degree spray pattern
- Forward angle, forward angle/forward spray, right angle or reverse angle tip (specify when ordering).
- Fits through a 3/4" clearance hole.
- Best suited for medium to heavy viscosity materials.
- Long needle shuts material off at the tip.
- Useable length of extension is approximately 1-1/2" shorter that extension length.