Blast Machine, Contractor, 6 cf pneu MQV

Description

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 6 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 6 nozzle (3/8-inch orifice).

Requirements for Operation

These items are required but not included with this equipment:

• Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
• Maximum working pressure 150 psi
• Minimum pressure 30 psi needed to operate OSHA-required remote control valves
• NIOSH-approved, type CE, supplied-air respirator.
• Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
• Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
• Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation

The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

• Four-wheel integral cart for ease of moving.
• Rated for 150-psi maximum working pressure.
• 1-1/2-inch Millennium valve provides unrestricted air flow.
• Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
• 29-inch width fits through standard doorways.
• 1-1/4-inch piping allows up to 50 percent increase in air flow, when compared to standard 1-inch piping
• Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
• Central hookup point for blast hose and remote controls.
• Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications

Clemco's quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).